QtWebEngine-20210401

Introduction to QtWebEngine

QtWebEngine integrates chromium's web capabilities into Qt. It ships with its own copy of ninja which it uses for the build if it cannot find a system copy, and various copies of libraries from ffmpeg, icu, libvpx, and zlib (including libminizip) which have been forked by the chromium developers.

This package and browsers using it may be useful if you need to use a website designed for google chrome, or chromium, browsers.

[Warning]

Warning

QtWebEngine uses a forked copy of chromium, and is therefore vulnerable to many issues found there. The Qt developers have always preferred to make releases at the same time as the rest of Qt (rather than adding emergency fixes), but with stable versions getting released after the current development version. Now that they are keen to move to Qt6, the 5.15.3 and later Qt-5.15 releases are initially only available to paying customers. QtWebEngine is something of an exception because of its LGPL licence, but getting the git sources (with the forked chromium submodule) to a position where they will successfully build on a current BLFS system can take a lot of effort and therefore updates to the book may be delayed.

It seems likely that future 5.15-series versions will also be released long after the chromium vulnerabilities are known, but fixes for QtWebEngine can be found in git and the editors take the view that known vulnerabilities in browsers should be fixed.

The tarball linked to below was created from the 5.15 git branch and the 87-branch of the chromium submodule (which is forked from chromium). See the GIT-VERSIONS file in the tarball for details of the latest commits.

This package is known to build and work properly using an LFS-10.1 platform.

[Note]

Note

By default, ninja will use all online CPUs +2 (if at least 4 exist), even if they are not available to the current task because the build terminal has been restricted with 'taskset'. To work around this, see the Command Explanations below.

Unusually, the shipped GN build system (used to create the Ninja files) requires a static libstdc++.a although the installed libraries correctly use the shared version. If that static library is not present, the build will fail quite quickly. Please note that if you try to build webengine as part of Qt and the static library is not available, that build will either complete without installing webengine, or else fail during the install (both variants have been observed in 5.12.0).

Package Information

Additional Downloads

qtwebengine Dependencies

Required

nodejs-14.16.1, NSS-3.63, Python-2.7.18, and Qt-5.15.2

Recommended

[Note]

Note

If these packages are not installed, the build process will compile and install its own (perhaps older) version, with the side effect of increasing build and installed disk space and build time.

Optional

libevent-2.1.12, Poppler-21.03.0, jsoncpp, libsrtp, snappy

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/qtwebengine

Installation of qtwebengine

[Note]

Note

Unlike version 5.15.2, the chromium-derived build system now needs python to be available and to be python2. In BLFS-10.1 the creation of the python symlink was removed as a step towards eventually getting rid of python2 (other old packages which need python2 usually work by invoking python2). If you are still using an earlier version of BLFS where /usr/bin/python exists, you can skip the commands to create the symlink, and to later remove it.

First, as the root user, create the python symlink:

ln -svf /usr/bin/python{2,}

Now apply a patch to fix several issues that can prevent the build working:

patch -Np1 -i ../qtwebengine-20210401-build_fixes-1.patch

Although the patch has ensured that git is not invoked during the build, the build system has labyrinthine rules of byzantine complexity, and in particular trying to build without two .git directories will lead to it eventually falling into unexpected and unbuildable code which references a private header that has not been created. Avoid this by creating the required directories:

mkdir -pv .git src/3rdparty/chromium/.git

Because this version of qtwebengine is aimed at a later release than the current public releases, change it to build for qt-5.15.2 using a sed:

sed -e '/^MODULE_VERSION/s/5.*/5.15.2/' -i .qmake.conf

Now, ensure that the local headers are available when not building as part of the complete Qt-5.15.2:

find -type f -name "*.pr[io]" |
  xargs sed -i -e 's|INCLUDEPATH += |&$$QTWEBENGINE_ROOT/include |'

Next, allow the pulseaudio library to be linked at build time, instead of run time. This also prevents an issue with newer pulseaudio:

sed -e '/link_pulseaudio/s/false/true/' \
    -i src/3rdparty/chromium/media/media_options.gni

Finally, fix a change in the build system which allows its developers to pass e.g. -j20 to make (for quick tests of some areas) but breaks the build with LFS's use of the NINJAJOBS environment variable:

sed -i 's/NINJAJOBS/NINJA_JOBS/' src/core/gn_run.pro

If an older version of the package's main library has been installed, when the package is built separately it will link to that in preference to its own not-yet-installed version, and fail because of missing symbols. Prevent that by, as the root user, moving the symlink out of the way:

if [ -e ${QT5DIR}/lib/libQt5WebEngineCore.so ]; then
  mv -v ${QT5DIR}/lib/libQt5WebEngineCore.so{,.old}
fi

Install qtwebengine by running the following commands:

mkdir build &&
cd    build &&

qmake .. -- -system-ffmpeg -webengine-icu &&
make

This package does not come with a test suite.

Now, as the root user:

make install

Remove references to the build directory from installed library dependency (prl) files by running the following commands as the root user:

find $QT5DIR/ -name \*.prl \
   -exec sed -i -e '/^QMAKE_PRL_BUILD_DIR/d' {} \;

Finally, as the root user, remove the python symlink:

rm -v /usr/bin/python

Command Explanations

qmake: This will build the included copy of ninja if it is not already installed and use it to configure the build.

-- -system-ffmpeg -webengine-icu: If any options are passed to qmake they must come after '--' which must follow '..' that points to the main directory. The options here cause it to use system ffmpeg and system icu. If built as part of full Qt5, the system icu is automatically used (only) by Qt5Core if it is available, but unless this option is used webengine will always use its shipped copy of icu, adding time and space to the build.

NINJAJOBS=4 make: If you patched system ninja in LFS to recognize the NINJAJOBS environment variable, this command will run system ninja with the specified number of jobs (i.e. 4). There are several reasons why you might want to do this:

  • Building on a subset of CPUs allows measuring the build time for that number of processors or to run other CPU-intensive tasks on other cores.

  • Improving the build speed on a less-well endowed 4-core machine. On a machine with a powerful CPU and plenty of RAM, running N+2 jobs (the ninja default for 4+ cores) for the large working sets of the C++ compiles in this package is typically only marginally faster than running N jobs at a time. But for a machine with less memory it can be much slower.

  • Reducing the number of cores being used on long running, CPU intensive packages may alleviate heat problems.

Configuring QtWebEngine

Configuration Information

If you are upgrading from an older minor version of this application, for some webpages to load you may need to clear the browser caches, e.g. for falkon they will be found in ~/.cache/falkon/. You will need to do this if the browser starts to render the page and then changes to a blank tab with a message that something went wrong, and a button to Retry. Even after removing the old caches, you may need to retry a few times for each affected tab.

If a browser using this package fails to run and when run from a term it reports 'Trace/breakpoint trap' that is probably a kernel configuration issue - there is no need to rebuild QtWebEngine, see the next section, recompile the kernel and reboot to the new kernel.

Kernel Configuration

This package does not require any of the optional kernel namespace items, but if User namespace is enabled PID namespace must also be enabled. In that case enable the following options in the kernel configuration and recompile the kernel if necessary:

General setup --->
  -*- Namespaces support --->
    [ ]     User namespace                    [CONFIG_USER_NS]
    [*]     PID namespace                     [CONFIG_PID_NS]

Contents

Installed Programs: qtwebengine_convert_dict and QtWebEngineProcess (in $QT5DIR/libexec)
Installed Libraries: libQt5Pdf.so, libQt5PdfWidgets.so, libQt5WebEngineCore.so, libQt5WebEngine.so, and libQt5WebEngineWidgets.so
Installed Directories: $QT5DIR/include/QtPdf, $QT5DIR/include/QtPdfWidgets, $QT5DIR/include/QtWebEngine, $QT5DIR/include/QtWebEngineCore, $QT5DIR/include/QtWebEngineWidgets, $QT5DIR/qml/QtWebEngine, and $QT5DIR/translations/qtwebengine_locales

Short Descriptions

qtwebengine_convert_dict

converts hunspell dictionaries (.dic) to chromium format (.bdic)

QtWebEngineProcess

is a libexec program which runs a zygote process (one that listens for spawn requests from a master process and will fork itself in response)

libQtWebEngine.so

provides QML types for rendering web content within a QML application

libQtWebEngineCore.so

provides public API shared by both QtWebEngine and QtWebEngineWidgets

libQtWebEngineWidgets.so

provides a web browser engine as well as C++ classes to render and interact with web content

Last updated on 2021-04-09 18:06:48 -0500