Beyond Linux® From Scratch (System V Edition) - Version 11.0

Chapter 22. Databases

PostgreSQL-13.4

Introduction to PostgreSQL

PostgreSQL is an advanced object-relational database management system (ORDBMS), derived from the Berkeley Postgres database management system.

This package is known to build and work properly using an LFS-11.0 platform.

Package Information

PostgreSQL Dependencies

Optional

Python-2.7.18, ICU-69.1, libxml2-2.9.12, libxslt-1.1.34, OpenLDAP-2.5.7, Linux-PAM-1.5.1, MIT Kerberos V5-1.19.2 and Bonjour

Optional (To Regenerate Documentation)

fop-2.6, docbook-4.5-dtd, docbook-dsssl-1.79, DocBook-utils-0.6.14, OpenJade-1.3.2, and SGMLSpm-1.1

User Notes: https://wiki.linuxfromscratch.org/blfs/wiki/postgresql

Installation of PostgreSQL

For enhanced security, it is better to have a dedicated group and user for running the PostgreSQL server. First, issue as the root user: 

groupadd -g 41 postgres &&
useradd -c "PostgreSQL Server" -g postgres -d /srv/pgsql/data \
        -u 41 postgres
[Note]

Note

There are several configuration items that add additional functionality with optional packages to PostgreSQL. Use ./configure --help to see a list.

Install PostgreSQL with the following commands: 

sed -i '/DEFAULT_PGSOCKET_DIR/s@/tmp@/run/postgresql@' src/include/pg_config_manual.h &&

./configure --prefix=/usr          \
            --enable-thread-safety \
            --docdir=/usr/share/doc/postgresql-13.4 &&
make

There are a number of programs in the contrib/ directory. If you are going to run this installation as a server and wish to build some of them, enter make -C contrib or make -C contrib/<SUBDIR-NAME> for each subdirectory.

Tests must be run as an unprivileged user because they need to start a temporary server and this is prevented as the root user. For the same reason, you need to stop all PostgreSQL servers if any are running. If a previous version of PostgreSQL is installed, it may be necessary to use --disable-rpath with configure to avoid failures, but installing the binaries created using this switch is not recommended. To test the results, issue: make check.

Now, as the root user: 

make install      &&
make install-docs

If you made any of the contrib/ programs, as the root user: 

make -C contrib/<SUBDIR-NAME> install
[Tip]

Tip

If you only intend to use PostgreSQL as a client to connect to a server on another machine, your installation is complete and you should not run the remaining commands.

Initialize a database cluster with the following commands issued by the root user: 

install -v -dm700 /srv/pgsql/data &&
install -v -dm755 /run/postgresql &&
chown -Rv postgres:postgres /srv/pgsql /run/postgresql

Now, initialize the database as the root user: 

su - postgres -c '/usr/bin/initdb -D /srv/pgsql/data'

Command Explanations

sed -i ...: This sed changes the server socket location from /tmp to /run/postgresql.

--enable-thread-safety: This switch makes the client libraries thread-safe by allowing concurrent threads in libpq and ECPG programs to safely control their private connection handles.

--with-openssl: builds the package with support for OpenSSL encrypted connections.

--with-perl: builds the PL/Perl server-side language.

--with-python: builds the PL/Python server-side language. Add PYTHON=/usr/bin/python2 for Python2 support, otherwise Python3 is used by default.

--with-tcl: builds the PL/Tcl server-side language.

Configuring PostgreSQL

Config Files

$PGDATA/pg_ident.con, $PGDATA/pg_hba.conf, and $PGDATA/postgresql.conf

The PGDATA environment variable is used to distinguish database clusters from one another by setting it to the value of the directory which contains the cluster desired. The three configuration files exist in every PGDATA/ directory. Details on the format of the files and the options that can be set in each can be found in /usr/share/doc/postgresql-13.4/html/index.html.

Boot Script

Install the /etc/rc.d/init.d/postgresql init script included in the blfs-bootscripts-20210826 package: 

make install-postgresql

Starting the PostgreSQL Server and Creating a Sample Database

The database server can be manually started with the following command (as the root user): 

su - postgres -c '/usr/bin/postgres -D /srv/pgsql/data > \
                  /srv/pgsql/data/logfile 2>&1 &'
[Note]

Note

If you are scripting this part, you should wait for the server to start before going on, by adding for example sleep 2 after the above command.

The instructions below show how to create a database, add a table to it, insert some rows into the table and select them, to verify that the installation is working properly. Still as user root, issue: 

su - postgres -c '/usr/bin/createdb test' &&
echo "create table t1 ( name varchar(20), state_province varchar(20) );" \
    | (su - postgres -c '/usr/bin/psql test ') &&
echo "insert into t1 values ('Billy', 'NewYork');" \
    | (su - postgres -c '/usr/bin/psql test ') &&
echo "insert into t1 values ('Evanidus', 'Quebec');" \
    | (su - postgres -c '/usr/bin/psql test ') &&
echo "insert into t1 values ('Jesse', 'Ontario');" \
    | (su - postgres -c '/usr/bin/psql test ') &&
echo "select * from t1;" | (su - postgres -c '/usr/bin/psql test')

When you are done with testing, you can shut down the server, by issuing as root: 

su - postgres -c "/usr/bin/pg_ctl stop -D /srv/pgsql/data"

Contents

Installed Programs: clusterdb, createdb, createuser, dropdb, dropuser, ecpg, initdb, pg_archivecleanup, pg_basebackup, pg_checksums, pg_config, pg_controldata, pg_ctl, pg_dump, pg_dumpall, pg_isready, pg_receivewal, pg_recvlogical, pg_resetwal, pg_restore, pg_rewind, pg_test_fsync, pg_test_timing, pg_upgrade, pg_verifybackup, pg_waldump, pgbench, postgres, postmaster (deprecated), psql, reindexdb, vacuumdb, optionally, if Tcl support has been built, pltcl_delmod, pltcl_listmod, pltcl_loadmod, and optionally (in contrib/) oid2name, pg_standby, vacuumlo, and many others
Installed Libraries: libecpg.{so,a}, libecpg_compat.{so,a}, libpgcommon.a, libpgcommon_shlib.a, libpgfeutils.a, libpgport.a, libpgport_shlib.a, libpgtypes.{so,a}, libpq.{so,a}, various charset modules and optionally programming language modules under /usr/lib/postgresql
Installed Directories: /usr/include/{libpq,postgresql}, /usr/lib/postgresql, /usr/share/{doc/postgresql-13.4,postgresql}, and /srv/pgsql

Short Descriptions

clusterdb

is a utility for reclustering tables in a PostgreSQL database

createdb

creates a new PostgreSQL database

createuser

defines a new PostgreSQL user account

dropdb

removes a PostgreSQL database

dropuser

removes a PostgreSQL user account

ecpg

is the embedded SQL preprocessor

initdb

creates a new database cluster

oid2name

resolves OIDs (Object IDs) and file nodes in a PostgreSQL data directory

pg_archivecleanup

cleans up PostgreSQL WAL (write-ahead log) archive files

pg_basebackup

takes base backups of a running PostgreSQL cluster

pg_checksums

enables, disables, or checks data checksums in a PostgreSQL database cluster

pg_config

retrieves PostgreSQL version information

pg_controldata

returns information initialized during initdb, such as the catalog version and server locale

pg_ctl

controls stopping and starting the database server

pg_dump

dumps database data and metadata into scripts which are used to recreate the database

pg_dumpall

recursively calls pg_dump for each database in a cluster

pg_isready

checks the connection status of a PostgreSQL server

pg_receivewal

is used to stream write-ahead logs from a PostgreSQL server

pg_recvlogical

controls PostgreSQL logical decoding streams

pg_resetwal

resets the write-ahead log and other control information of a PostgreSQL database cluster

pg_restore

creates databases from dump files created by pg_dump

pg_rewind

synchronizes a PostgreSQL data directory with another data directory that was forked from the first one

pg_standby

supports the creation of a PostgreSQL warm standby server

pg_test_fsync

determines the fastest wal_sync method for PostgreSQL

pg_test_timing

measures timing overhead

pg_upgrade

upgrades a PostgreSQL server instance

pg_verifybackup

verifies the integrity of a base backup of a PostgreSQL cluster

pg_waldump

displays a human-readable rendering of the write-ahead log of a PostgreSQL database cluster

pgbench

runs a benchmark test on PostgreSQL

pltcl_delmod

is a support script used to delete a module from a PL/Tcl table. The command requires the Pgtcl package to be installed

pltcl_listmod

is a support script used to list the modules in a PL/Tcl table. The command requires the Pgtcl package to be installed

pltcl_loadmod

is a support script used to load a module into a PL/Tcl table. The command requires the Pgtcl package to be installed too

postgres

is the PostgreSQL database server

postmaster

(deprecated, a symlink to postgres) is a multi-user database daemon

psql

is a console based database shell

reindexdb

is a utility for rebuilding indexes in a database

vacuumdb

compacts databases and generates statistics for the query analyzer

vacuumlo

removes orphaned large objects from a PostgreSQL database

libecpg.{so,a}

contains functions to support embedded SQL in C programs

libecpg_compat.{so,a}

is the ecpg compatibility library

libgport.a

is the port-specific subsystem of the Postgres backend

libpgtypes.{so,a}

contains functions for dealing with Postgres data types

libpq.{so,a}

is the C programmer's API to Postgres

Last updated on